21
STARTING THE ENGINE
5. Pull the bystarter lever
fo rwa rd to “ O N”
position as indicated
(Use choke during cold
conditions).
2. Turn the fuel valve
“ON”.
1. Turn the ignition
switch “ON”.
3. S e l e c t n e u t r a l
position & check N
indicator glows on
instrument cluster
with ignition “ON”.
6. Press the starter switch.
(Alternatively kick
pedal can be used for
starting).
4. Make sure whether
the i3s switch is
in “ON” or “OFF”
position.
WARNING
!!
Never run the engine in a closed area, the exhaust contains poisonous gases.
NOTE
î To start the engine in any gear position using the electric starter, press the clutch lever and
push the starter switch.
î Kick starting will not be possible when the transmission gears are engaged. Shift the
transmission into neutral before kick starting.
î Never attempt to kick start while motorcycle is moving forward or backward. This may lead to
damage to the product and is not safe as well.
î Do not accelerate when starting the vehicle with the bystarter “ON”.
7. Push the bystarter lever
upwards, ( ) position
as indicated, after the
engine gets sufficiently
warmed up to have a
stable throttle response.
To Next Page
Loading...
