32
î Tighten a new spark plug 1/2 turn with
after the plug seats, with a spark plug
wrench to compress the washer. If you are
reusing a plug, it should only take 1/8-
1/4 turn after the plug seats.
AIR CLEANER ELEMENT
The air cleaner element is viscous type, it
should be replaced at regular intervals
(page 26). Early replacement may be
required when riding in unusually wet or dusty
area.
î Remove the seat (page 19).
î Remove the side cover (1) by removing
side cover screws (2).
1
2
(1) Side cover (2) Side cover screws
î Remove the air cleaner cover screws
washers (3) and the cover (4).
(5) Element air cleaner screws/washers
(6) Element air cleaner
(3) Air cleaner cover screws/washers
(4) Air cleaner cover
4
3
î Remove the air cleaner cover screws/
washers (5) and remove the element air
cleaner (6).
6
5
î Remove the air cleaner element (6)
from housing (7).
î Clean the air cleaner housing (7) using a
shop towel.
To Next Page
Loading...
