HERO Achiever - ENGINE OIL MANAGEMENT; Engine Oil Level Check and Top-Up; Engine Oil Replacement Process

ENGINE OIL
Use only Hero Genuine Engine Oil.
BRAND : Hero 4T plus
GRADE : SAE 10W 30 SJ Grade
(JASO MA).
Manufactured by :
1. Tide Water Oil Co. (India) Ltd.
2. Savita Oil Technologies Limited.
3. Bharat Petroleum Corporation Limited.
OIL CAPACITY : 1.2 litres
ENGINE OIL LEVEL CHECK/TOP UP
PROCESS
Check engine oil level each day before
operating the motorcycle. The oil level dipstick
(1) is on the right crankcase cover for
measuring oil level. Oil level must be
maintained between the upper (2) and lower
(3) level marks on the oil level dipstick.
Do top up if oil level reaches towards the lower
level mark or every whichever is earlier.3000 km
î Park the motorcycle on its main stand.
î Start the engine & let it idle for 3-5 minutes.
î Stop the engine and wait for 2-3 minutes.
î Remove the oil level dipstick, wipe it clean
and insert without screwing it in.
î Remove the oil level dipstick and check the
oil level.
î If required, add the specified oil up to the
upper level mark. Do not overfill.
î 1.1Quantity of oil to be filled is litres
(approx) during oil change when right . (
crankcase cover is not removed .)
î Reinstall the oil level dipstick and check for
oil leaks.
ENGINE OIL REPLACEMENT PROCESS
î To drain the oil, remove the oil level dipstick
and drain bolt (1).
î After the oil has completely drained,
reinstall the drain plug with a new sealing
washer (2).
UPPER
LOWER
1
(1) Oil level dipstick (2) Upper level mark
(3) Lower level mark
23
(1) Drain bolt (2) Sealing washer
29
1
2