MAINTENANCE SCHEDULE
Perform the Pre-ride Inspection (page 20) at each scheduled maintenance period.
I: INSPECT C: CLEAN R: REPLACE A: ADJUST L:LUBRICATE T: TOP UP
E: EMISSION CHECK
The following Maintenance Schedule specifies all maintenance required to keep your
motorcycle in peak operating condition. Maintenance work should be performed in accordance
with standards and specifications of Hero MotoCorp by properly trained and equipped
technicians. Your Authorised Distributor/Dealer meets all of these requirements.
Ensure that each paid service is availed within 90 days or 3000 km from the date of previous
service, whichever is earlier.
To be serviced by your Authorised Distributor/Dealer unless the owner has the
relevant tools, technical information and is technically qualified.
In the interest of safety, we recommend that these jobs are carried out only by your
Authorised Distributor/Dealer.
Replace air cleaner element once in every 15000 km or early replacement may be
*
required when riding in dusty areas.
Replace engine oil once in every 6000 km. Top up if the oil level is at or near the
**
lower level mark.
Inspect & maintain specified torque.
***
Replace once in every two years or 30000 km, whichever is earlier.
****
• Check idle CO emission along with idle rpm/idle CO adjustment (if required).
@ Visit Authorised Distributor/Dealer for inspection, cleaning, lubrication and
adjustment of drive chain at every 2000 km.
Note-1: At higher odometer readings, repeat the frequency interval established here.
Note-2: Inspect the bearings free play, replace if necessary.
Note-3: Replace front fork oil once in a every 2 years or 30000 km, whichever is earlier.
Note-4: Inspect for any play in the mounting bushes, replace if necessary.
Note-5: Inspect the hoses for deterioration, damage or loose connections and canister for
cracks or other damages.
Note: Always wipe the water from the motorcycle after washing. Use clean soft cloth or
pressurized air for completely drying the water.
26
To Next Page
Loading...
