HERO Achiever - BRAKE SYSTEM MAINTENANCE; Front Brake System Details

NOTE
Vis it Aut horised Distribu tor/Dealer
for inspection, cleaning, lubrication and
adjustment of drive chain at every 2000 km.
DRIVE CHAIN SLIDER
(Refer to “Maintenance Schedule” on
(page 30).
Check the chain slider (1) for wear, The chain
slider must be replaced if the or wear limit is
reached. For replacement, visit your
Authorised Distributor/Dealer.
39
î Tighten the rear axle nut and sleeve nut.
î Check the drive chain slack again.
î Rear brake pedal free play is affected when
repositioning the rear wheel to adjust drive
chain slack. Check rear brake pedal free
play and adjust as necessary .(page 41)
Lubrication
î Turn the engine “OFF”, park the
motorcycle on its main stand and shift the
transmission into neutral.
î Lubricate the drive chain by applying liberal
amount of SAE-90 oil or chain lubricant.
CAUTION
!!
Regular adjustment and lubrication as per the
maintenance schedule would ensure high
performance and longer life.
(1) Chain slider (2) Wear limit
CUTOUT
2
1
FRONT BRAKE (DISC TYPE)
Master Cylinder/Reservoir.
Location: Right handle bar.
Brake fluid recommended:
Castrol Q Stop-DoT 3 or DoT 4
Fluid level-Ensure that the brake fluid level
does not fall below “MIN” mark (1) on the
master cylinder, when checked with the
1
(1) "MIN" mark