77
(c) Front turn signal bulb
•
Insert hand from body cover front side,
above front fender area and remove turn
signal bulb holder (1) by turning counter
clockwise.
•
Remove the bulb (2) by turning it to
counterclockwise direction.
•
Install a position lamp assembly in the
reverse order of removal.
(1) Front turn signal lamp holder
(2) Front turn signal lamp bulb
1
2
•
Remove the fuel drain tube (1).
•
Install a new bulb in the reverse order of
removal.
•
Remove the fuel tank lid lock cable from the
guide (2).
(d) Tail/Stop lamp LED unit
•
Remove the body cover (page 41).
•
Install a new tail/stop lamp unit in the
reverse order of removal.
•
Remove the tail/stop lamp unit from
the body cover by removing the screws (3).
(1) Fuel drain tube (2) Guide (3) Screws
3 1
2
(1) Bulb holder (2) Rear turn signal bulb
1
2
•
Remove the rear turn signal bulb (2) by
turning it to counterclockwise direction.
(e) Rear turn signal bulb
•
Insert hand from body cover rear side, above
rear fender area and remove turn signal bulb
holder (1) by turning counter clockwise.
•
Install a new bulb in the reverse order of
removal.
To Next Page
Loading...
