EasyManua.ls Logo

HERO PASSION PRO PROGRAMMED FI - Usb Charger (Optional)

HERO PASSION PRO PROGRAMMED FI
76 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
22
(1) Helmet holder hook
(2) Wire helmet set (optional) (3) Seat
3
1 2
WARNING
!!
Use the helmet holder only while parked. Do
not ride with a helmet secured by the holder.
Riding with a helmet attached to the holder
can interfere with the rear wheel of
suspension and could cause a crash in which
you can be seriously hurt of killed.
Use of non-standard USB cable may cause
damage to the mobile phones.
USB CHARGER (OPTIONAL)
To connect a mobile phone charger, first
remove the cap from the USB charger and
then plug in the charger cable to it.
Hero MotoCorp will not be responsible for
damages caused due to use of non standard
USB cable.
A USB charger (1) with a cap (2) located
inside the USB charger compartment (3) is
provided in your vehicle under the seat to
charge your mobile phone safely while riding.
1
(1) USB charger (2) Cap
(3) USB charger compartment
3
2
Always place the device in a soft clean
cloth/towel to avoid any damage due to
road shocks while riding.
This port is for charging compatible USB
devices.
Multiple charging of USB devices have to be
avoided, simultaneous charging may lead to
slow or no charging.
Do not leave the USB device and USB cable
in the USB charger compartment when the
vehicle is parked.
For mobile usage:
Mobile in USB charger compartment is
prone to damage, while using this feature
necessary precaution should be taken.
Charge your device only when the engine is
operational/while riding. Charging the USB
device when the engine is “OFF” would lead
to early discharge of battery.
CAUTION
!!

Related product manuals