EasyManua.ls Logo

HERO PASSION PRO PROGRAMMED FI - Spark Plug and Engine Oil; Spark Plug Inspection and Specifications

HERO PASSION PRO PROGRAMMED FI
76 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
29
WARNING
!!
Failure to follow maintenance instructions and
precautions properly can seriously injure you.
Always follow the procedures and precautions
in this owner's manual.
SAFETY PRECAUTIONS
Injury from moving parts.
Make sure the engine is “OFF” before you
begin any maintenance or repair. This will
help to eliminate several potential hazards:
Carbon monoxide poisoning from
engine exhaust.
Be sure there is adequate ventilation
whenever you operate the engine.
Burns from hot parts.
Let the engine and exhaust system cool
before touching.
Remember that your Authorised Hero
MotoCorp workshop knows your vehicle best
and is fully equipped to maintain and repair it.
To reduce the possibility of a fire or
explosion, be careful when working around
petrol or batteries. Use only nonflammable
solvent not petrol, to clean parts. Keep ,
cigarettes, sparks and flames away from the
battery and all fuel-related parts.
Read the instruction before you begin and
make sure you have the tools and skills
required.
T it is o ensure best quality and reliability,
recommended to use Hero MotoCorp
genuine parts for repair and replacement.
To help prevent the vehicle from falling
over, park it on a firm, level surface on the
main stand.
Do not run the engine unless instructed
to do so.
WARNING
!!
Improperly maintaining this vehicle or
failing to correct a problem before you ride
can cause a crash in which you can be
seriously hurt or killed.
Always follow the inspection and
maintenance recommendations and
schedules in this owner's manual.
Maintenance safety
However, we cannot warn you of every
conceivable hazard that can arise in
performing maintenance. Only you can decide
whether or not you should perform a given
task.
You will come across some of the most
important safety precautions in the following
pages of this manual.
Other tasks that are more difficult and require
special tools are best performed by
professionals. It is recommended that wheel
removal should normally be handled by a Hero
MotoCorp authorised workshop.
This section includes instructions on some
important maintenance tasks. You can
perform some of these tasks with the tools
provided (if you have basic mechanical skills).

Related product manuals