55
NOTE
For repair and replacement of tyre it is advised
to visit your Authorised Hero MotoCorp
workshop.
NOTE
The imported tyre(s) if fitted without ISI mark;
are in compliance of BIS standard and Central
Motor Vehicle Rules 1989, as declared by the
Tyre manufacturer.
Important safety reminders
•
Tighten bolts and nuts at regular interval
shown in the maintenance schedule.
NUTS, BOLTS & FASTENERS
•
Do not install a tube inside a tubeless tyre on
this vehicle. Excessive heat buildup can
cause the tube to burst.
•
Use only tubeless tyres on this vehicle. The
rims are designed for tubeless tyres, and
during hard acceleration or braking, a tube-
type tyre could slip on the rim and cause the
tyre to rapidly deflate.
•
Check that all cotter pins, safety clips, hose
clamps and cable stays are in place.
BATTERY
Location
Specification
The battery is located behind the left side
cover.
**MF Battery, 12V 3 Ah/ETZ-4
•
Check that all chassis nuts and bolts are
tightened to correct torque values.
It is not necessary to check the battery
electrolyte level or add distilled water as the
battery is a Maintenance Free (sealed) type.
If your battery seems weak and electrolyte is
leaking (causing hard starting or other
electrical troubles), contact your Authorised
Hero MotoCorp workshop.
NOTE
This symbol on the battery means that
this product must not be treated as
household waste.
This symbol on the battery means the
old battery must be returned to your
Authorised Hero MotoCorp workshop
as it must be treated as recyclable
material.
•
An improperly disposed battery can be
harmful to the environment and human
health. Always confirm local regulations for
battery disposal.
•
Battery is a Maintenance-Free (sealed) type
and can be permanently damaged if the
sealing strip is removed.
*MF stands for Maintenance Free
To Next Page
Loading...
