EasyManua.ls Logo

HERO PASSION PRO PROGRAMMED FI - Page 60

HERO PASSION PRO PROGRAMMED FI
76 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
56
from the slot (3) and lugs from the
grommets (4).
WARNING
!!
A spark or flame can cause the battery to
explode with enough force to seriously hurt you.
The battery gives off explosive hydrogen gas
during normal operation.
Wear protective clothing and a face shield,
or have skilled technician do the battery
maintenance.
Battery storage
Battery removal
Remove the left side cover screws (1) and
remove the side cover by releasing the tab
discharge rapidly if optional electrical
accessories are fitted on the vehicle.
If the battery is expected to be stored for
more then two months, ensure to fully
charge the battery once in a month.
Always ensure the battery is fully charged
before installation.
FF” ( ). Make sure the ignition switch is “O
If in case your vehicle is not used for more
than a month remove the battery, fully
charge and store in a cool and dry place.
workshop if you see any symptom of battery
discharge as earliest as possible to get the
battery charged. The battery has a tendency to
Battery charging
Always visit your Authorised Hero MotoCorp
Ensure the battery leads are properly
connected to the battery terminals during
installation.
(pages 21)Remove the seat .
2
(1) Left side cover screws (2) Side cover
(3) Tab/slot (4) Lugs/grommets
1
4 3
Disconnect the negative (-)ve terminal lead
(6) from the battery first, then disconnect
the positive (+)ve terminal lead (7).
Remove the battery clamp (5).
(5) Battery clamp (6) (-)ve terminal
(7) (+)ve terminal (8) Battery
8 5
76

Related product manuals