58
(1) Stop lamp switch (2) Adjusting nut
(A) Advance (B) Retard
2
1
A
B
HEADLAMP FOCUS ADJUSTMENT
Headlamp is factory preset. However in case
of adjustment required, please follow the steps
as given below:
•
Headlamp adjustment is done by the
headlamp adjusting bolt (1) located below
headlamp.
•
Park the vehicle on level ground.
•
Turn the ignition switch to “ON” position
( ) and start the engine.
•
ampAdjust the headl beam vertically
by the loosening bolt & move the headlamp
unit forward & backward for correct focus
adjustment.
1
(1) Headlamp adjusting bolt
WARNING
!!
An improperly adjust headlamp may blind
oncoming rider/driver or it may fail to light the
road for a safe distance.
CATALYTIC CONVERTER
The catalytic converter must operate at a high
temperature for the chemical reactions to take
place. It can set on fire any combustible
material that come near it. Park your vehicle
away from high grasses, dry leaves, or other
flammable material.
This vehicle is equipped with the catalytic
converter in the muffler to meet the emission
norms.
The catalytic converter contains precious
metals that serve as catalysts, promoting
chemical reactions to convert the exhaust
gasses without affecting the metals. The
catalytic converter acts on HC, CO and NOx.
A defective catalytic converter contributes to
air pollution and can impair your engine’s
performance.
Follow these guidelines to protect your
vehicle’s catalytic converter.
To Next Page
Loading...
