EasyManua.ls Logo

HERO PASSION PRO PROGRAMMED FI - Page 38

HERO PASSION PRO PROGRAMMED FI
76 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
34
OIL CAPACITY: 0.95 litre
Bharat Petroleum Corporation Limited.
Check engine oil level each day before
operating the vehicle.
Engine oil level inspection/Top up
process
Do top up if oil level reaches towards the lower
level mark or every 3000 km whichever is
earlier.
The oil level dipstick (1) is on the right
crankcase cover for measuring oil level. Oil
level must be maintained between the upper
(2) and lower (3) level marks on the oil level
dipstick.
Savita Oil Technologies Limited.
(1) Oil level dipstick (2) Upper level mark
(3) Lower level mark
UPPER
LOWER
Turn the i3s switch to “OFF” position.
Park the vehicle on its main stand.
Start the engine & let it idle for 3-5
minutes.
1
3
Slightly loosen the engine oil check bolt (4)
and check the engine oil entry into the
cylinder head.
After checking the oil circulation, tighten the
engine oil check bolt.
Stop the engine and wait for 2-3 minutes.
Reinstall the oil level dipstick and check for
oil leaks.
Remove the oil level dipstick and check the
oil level.
If required, add the specified oil up to the
upper level mark. Do not overfill.
Remove the oil level dipstick, wipe it clean
and insert without screwing it in.
Quantity of oil to be filled is 0.75 liters
(approx.) during oil change when right
crankcase cover is not removed.
4
(4) Engine oil check bolt
The engine will stall if the i3s switch is in
“ON” position during warmup.
NOTE
2

Related product manuals