63
•
Always ensure the battery is fully charged
before installation.
Battery charging
•
FF” ( ). Make sure the ignition switch is “O
workshop if you see any symptom of battery
discharge as earliest as possible to get the
battery charged. The battery has a tendency to
•
If in case your vehicle is not used for more
than a month remove the battery, fully
charge and store in a cool and dry place.
•
Ensure the battery leads are properly
connected to the battery terminals during
installation.
•
If the battery is expected to be stored for
more then two months, ensure to fully
charge the battery once in a month.
from the slot (3) and lugs from the
grommets (4).
Always visit your Authorised Hero MotoCorp
discharge rapidly if optional electrical
accessories are fitted on the vehicle.
Battery removal
•
(pages 28)Remove the seat .
Battery storage
•
Remove the left side cover screws (1) and
remove the side cover by releasing the tab
2
(1) Left side cover screws (2) Side cover
(3) Tab/slot (4) Lugs/grommets
4 3
• Remove the battery clamp (5).
• Disconnect the negative (-)ve terminal lead
(6) from the battery first, then disconnect
the positive (+)ve terminal lead (7).
• Pullout the battery from the battery box.(8)
(5) Battery clamp (6) (-)ve terminal
(7) (+)ve terminal (8) Battery
8 5
6
1
7
To Next Page
Loading...
