4
3
2
1
N
Below is the riding recommendation to
avoid clutch slippage, uneven stalling
and getting the optimum performance:
Gear Min. speed
(km/h)
Max. speed
(km/h)
1st
2nd
3rd
4th
0
12
20
30
20
45
70
Max.
To stop the vehicle, press the rear brake pedal
For integrated braking system (IBS)
•
For normal braking, close the throttle and
gradually apply both front and rear brakes
simultaneously while shifting down gears to
suit your road speed.
•
For maximum deceleration/quick stopping,
close the throttle and apply the front and
rear brakes simultaneously.
BRAKING
for the application of front and rear brakes
simultaneously. However, for more effective
braking, it is advised to apply front and rear
brake simultaneously, keeping the throttle in
closed position.
33
•
While the engine is idling, press the clutch
lever and depress the gearshift pedal to shift
st
into 1 (low) gear.
•
Slowly release the clutch lever and at the
same time, gradually increase engine speed
•
When the vehicle attains a moderate speed,
close the throttle, press the clutch lever and
nd
shift to gear by depressing the gearshift
2
pedal.
•
The sequence is repeated progressively to
rd
th
shift 3 and 4 (top gear).
RIDING
by opening the throttle. Coordination of the
throttle and clutch lever will assure a smooth
positive start.
CAUTION
!!
Do not shift gears without operation of clutch
and without closing the throttle otherwise this
would lead to damage of gears.
To Next Page
Loading...
