EasyManua.ls Logo

HERO PASSION XTEC - Troubleshooting and Warranty; Basic Troubleshooting Guide

HERO PASSION XTEC
83 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
BASIC TROUBLESHOOTING
Check fuse
Inspect battery
Check connections, ignition switch/starter switch
Ok
Ok
Ok
Loose
Replace fuse (page 64)
Secure connections
Weak
Fused
Consult Authorised Hero MotoCorp Workshop
C. Electric starter not working
Consult Authorised Hero MotoCorp Workshop
1. STARTING TROUBLE - ENGINE DOES NOT START
67
Check ignition switch
Ok
Ok
Ok
“OFF”
D. No spark at spark plug
No spark
Consult Authorised Hero MotoCorp Workshop
Check spark plug for fouling/
Improper electrode gap
Replace spark plug/adjust
Spark plug gap (0.6-0.7 mm)
Loose contact
Check for poorly connected
Or loose spark plug wire
Secure properly
Turn ignition switch “ON”
B. Fuel system
Key “ON” Position
Check for operating sound of fuel pump
Broken fuel pump wire connector
Refill the fuel tank
Secure connections
Leakage
Consult Authorised Hero MotoCorp Workshop
Check fuel gauge
Check fuel lines
OK
OK
Check side stand in gear condition (page 26)
Side stand“Down”
A. Side Stand Engine Kill System
Consult Authorised Hero MotoCorp Workshop
Move the side stand up
Side stand “Up”
Low fuel indicator glows
continuously
Refill
Consult Authorised
Hero MotoCorp Workshop

Related product manuals