HERSILL OXYMO - POWER SUPPLY FEEDING

44
8.3. POWER SUPPLY FEEDING
OXYMO can operate when connected directly to the power supply (100-
240V
AC
, 45/65 Hz), using the provided power adapter (See Chapter 4).
Depending whether or not batteries are installed, and if they are or not
rechargeable, 2 operating modes are available from the power supply:
1. If unit provided with rechargeable batteries,
they will automatically be recharged.
2. If there are no batteries, or they are alkaline
(no rechargeable), after 30 seconds an empty
battery symbol will be shown and it will start
blinking. This way, the unit advices that
though working correctly, no batteries are
charging.
I CAUTION .
In case of faulty batteries or batteries in a wrong position (reversed polarity or
faulty contact), the unit will respond like in case number 2 (an empty battery
symbol will blink).