7
• Periodically check the tank pressure (on the gauge), to ensure it is
sufficiently filled (it is advisable to always have a spare bottle).
• Do not immerse the unit.
• Do not subject the device to temperatures above 50 ° C or below
-10 ° C.
• Never open the valve on the oxygen bottle abruptly as this may
damage your pressure regulator. You must always do it slowly.
• In case of failure contact your supplier. Never attempt to repair the
unit or accessories.
• Do not modify the unit or interconnected with other equipment or
accessories other than those described in these instructions. Do
not use any additional tube between the unit and the oxygen.
• Electro-medical devices require special precautions regarding
EMC and needs to be installed and put into service according to
the information relating to the compatibility provided by the
accompanying documents. The use of accessories and cables
other than those specified may result in increased emissions or
decreased immunity of the device.
To Next Page
Loading...
