HICAPS TRINITY - PIN Entry Training Mode

39
STEP 3
If prompted for a PIN, the following instructions will be played:
‘Please enter a PIN.
The PIN pad has telephone layout with 1,2,3 at the top, and cancel, 0, ok at the bottom of
the screen
Tactile bumps around the screen border indicating every column and row of the PIN pad.
The screen will be blank.
To nd digits, start from one of the tactile bumps, and move one nger vertically or
horizontally, until you hear a beep or the words cancel, or ok.
To nd additional digits, move your nger around the keypad and listen for the beeps.
To select a digit, lift your nger, then tap two times using one nger on the screen and
listen for the acceptance sound.
If you are not sure you found the right digit, do not double tap the screen. Simply start
searching from the corner again.
The terminal will announce when you have entered 4 digits. To nish and pay, select ok at
the bottom right and double tap towards the centre of the screen. To abort transaction,
select the cancel at the bottom left and double tap towards the centre of the screen.’
5.1.3 PIN entry training mode
The HICAPS Terminal has a PIN entry training mode for
cardholders to understand how to process payments
requiring a PIN. To enable this function, use the following
steps:
STEP 1
To process an EFTPOS Sale transaction, select Sale icon
from the home screen.
Note: If the terminal has been congured as a multi
merchant terminal you will be prompted to select the
appropriate merchant for the transaction.