HID Fargo DTC1250 - Page 12

Page 12 October 2013
© 2013 HID Global Corporation/ASSA ABLOY AB. All rights reserved.
DTC1250e/DTC1000Me/DTC4250e Card Printer User Guide, PLT-01668, 1.0
Term
Function
Accepted Card Types
PVC or polyester cards with polished PVC finish; monochrome resin
required for 100% polyester cards; optical memory cards with PVC finish;
rewrite
Input Hopper Card
Capacity
100 cards (.030”/.762.mm) DTC1250e, DTC1000Me, DTC4250e
200 cards (.030”/.762 mm) DTC4250E (Dual Hopper)
Output Hopper Card
Capacity
100 cards (.030”/.762.mm) DTC4250e
30 cards (.030”/.762.mm) DTC1250e
Reject Hopper Card
Capacity
100 cards (.030”/.762.mm) – same-side input/output card hopper
(required)
Card Cleaning Card cleaning roller integrated into the ribbon cartridge.
A new cleaning roller is included with each ribbon cartridge.
Printer Memory
32MB RAM
Operating Systems
Windows® XP/Vista™ (32 bit & 64 bit)/Server 2003 & 2008/Windows® 7
(32 & 64 bit)/Windows® 8 (32 & 64 bit)/Linux®
Interface
USB 2.0 and Ethernet with internal print server
Operating Temperature
65 degrees to 80 degrees F/18 degrees to 27 degrees C
Humidity
20-80% non-condensing
Dimensions Here are the dimensions for the DTC1250e:
• Single-Sided Printer: 8.8˝H x 13.7˝W x 7.9˝D/224mmH x 348mmW x
201mmD (DTC1000Me)
• Dual-Sided Printer: 9.8˝H x 18.7˝W x 9.2˝D/249mmH x 475mmW x
234mmD
Here are the dimensions for the DTC4250e:
• Single-Sided Printer: 9.8˝H x 18.1˝W x 9.2˝D/249mmH x 460mmW x
234mmD
• Dual-Sided Printer: 9.8˝H x 18.7˝W x 9.2˝D/249mmH x 475mmW x
234mmD
Weight
Single-Sided: 8 lbs./3.63 Kg; Dual-Sided: 10 lbs./4.54 Kg
Agency Listings
Safety: UL 60950-1, CSA C22.2 (60950-1), and CE; EMC; FCC Class A,
CRC c1374, CE (EN 55022 Class A, EN 55024), CCC, BSMI, KCC
Supply Voltage
100-240 VAC, 1.6 A
Supply Frequency
50 Hz/60 Hz
Warranty
Printer – Two years; Printhead – Two years, unlimited pass with
UltraCard™
Encoding Options
Supported
• 125kHz (HID Prox) reader
• 13.56 MHz (iCLASS, MIFARE, ISO 14443 A/B, ISO 15693)
read/write encoder
• Contact Smart Card Encoder reads from and writes to all ISO7816
1/2/3/4 memory and microprocessor smart cards (T=0, T=1) as well
as synchronous cards
• ISO Magnetic Stripe Encoding, dual high- and low-coercivity, Tracks
1,2 and 3