Page 14 October 2013
© 2013 HID Global Corporation/ASSA ABLOY AB. All rights reserved.
DTC1250e/DTC1000Me/DTC4250e Card Printer User Guide, PLT-01668, 1.0
YMCKO – Full Color/Resin
250 250
YMCKO Half Panel – Full Color
(1/2)/Resin Black/Overlay
350 350
YMCFKO - Full Color/UV
Fluorescing/Resin Black/Overlay
200
YMCKK - Full Color/2 Resin
YMCKOK - Full Color/2 Resin
200 200
YMCFKOK - Full Color/UV
Fluorescing/2 Resin
175
KO - Premium Black
500 500 500
BO - Dye-Sub Black/Overlay
1.3.2 Printer Components: Blank Cards
Type Description
The Card Printer accepts standard CR-79 and CR-80 sized cards.
Card Surface
Suitable cards must have a polished PVC surface free of fingerprints, dust or any
other types of embedded contaminants. In addition, cards must have a completely
smooth, level surface in order for the printer to achieve consistent color coverage.
Certain types of Proximity cards have an uneven surface that will inhibit consistent
color transfer.
• Certain types of smart card chips are raised slightly above the cards surface
which also results in poor color transfer.
UltraCard™
Brand Cards
The UltraCard™ product line, available exclusively as part of HID's Global's
FARGObrand secure card issuance solutions, has a long standing reputation
among dealers and end-Users for consistent quality in construction.
• In addition to blank stock, the UltraCard line is available in a variety of
configurations for magnetic stripe, custom holograms and other additional anti-
counterfeiting feature
• UltraCard Premium is the preferred card for Direct-to-Card (DTC®) applications
that require a higher quality card. The UltraCard Premium’s composite material
construction provides for maximum durability, flexibility and card life, with
optimal resolution print quality for lamination and fluorescent panel Ribbon
printing applications.
• UltraCard PVC cards are medium-durability cards for a glossy, photo quality
finish. These cards are manufactured to ensure clean, scratch-free cards for
high-quality prints and extended Printhead life.