HID Fargo DTC1250 - Connecting the Printer Power

Page 24 October 2013
© 2013 HID Global Corporation/ASSA ABLOY AB. All rights reserved.
DTC1250e/DTC1000Me/DTC4250e Card Printer User Guide, PLT-01668, 1.0
2.2.3 Connecting the Printer power
Follow this procedure.
Note: Do not connect the printer’s USB cable until prompted during the printer driver installation.
Step Procedure
1
Plug the AC adapter power cable into the back of the Printer
2
Plug the wall power cable into the AC power adapter.
3
Plug the wall power cable into a standard 100-240VAC power outlet.
4
Press the printer’s power button to power on the printer.
Note: The printer powers down during the ‘sleep time’ but automatically powers up when a
print job is sent.