HID Fargo DTC1250 - Printer Connected Via USB Connection

Page 28 October 2013
© 2013 HID Global Corporation/ASSA ABLOY AB. All rights reserved.
DTC1250e/DTC1000Me/DTC4250e Card Printer User Guide, PLT-01668, 1.0
Step
Procedure
3
Open a Web Browser.
Type the IP Address followed by /SwiftID.html to access the Swift ID badging application.
• For example: 10.244.69.70/SwiftID.html
• The Getting Started with Swift ID… page displays.
3.1.3 Printer Connected Via USB Connection
Perform this procedure on the initial setup of a printer when connecting Swift ID via USB.
Note: This application is not intended for use with multiple printers.
To start using Swift ID via a USB connection with a DTC1250E or DTC4250E that has already been
installed on the PC, select Option 1 or 2 and complete the procedure.
Step
Procedure
1
Follow the on-screen instructions during the Printer Driver installation process to install all
the required components to access Swift ID via a USB connection.
Note: The HID EEM Driver installs. A shortcut appears on the desktop, which allows you
to easily launch the application.
3.1.3.1 Option 1
Step Procedure
1
Uninstall the printer driver, reinstall the printer driver and check the
Enable Swift ID over
a USB connection check box.