Page 8 October 2013
© 2013 HID Global Corporation/ASSA ABLOY AB. All rights reserved.
DTC1250e/DTC1000Me/DTC4250e Card Printer User Guide, PLT-01668, 1.0
1.2 Safety Messages (Review Carefully)
Symbol
Critical Instructions for Safety purposes
Failure to follow these guidelines results in personal injury or death.
To prevent personal injury or death:
• Reference the following safety messages before performing an operation.
• Always remove the power cord prior to performing repair procedures, unless
otherwise specified.
•
Ensure only qualified personnel perform these procedures.
This device is electro statically sensitive. You may damage the device if exposing
it to static electricity discharges.
To prevent damage:
• Reference the following safety messages before performing an operation.
• Observe all established Electrostatic Discharge (ESD) procedures while
handling cables in or near the Circuit Board and Printhead Assemblies.
• Always wear an appropriate personal grounding device.
• Always remove the Ribbon and Cards from the Printer before making any
repairs, unless otherwise specified.
• Remove jewelry and thoroughly clean hands before working on the Printer.
This symbol warns of an electrical hazard that could result in personal injury or
death.
For safety purposes, do not use Ethernet for a direct connection outside of the
building.
To Next Page
Loading...
