October 2013 Page 53
© 2013 HID Global Corporation/ASSA ABLOY AB. All rights reserved.
DTC1250e/DTC1000Me/DTC4250e Card Printer User Guide, PLT-01668, 1.0
Select the Magnetic Track
Selection option to specify
which track is to be
configured through the
Magnetic Track Options.
This applies if the
application being used
requires
customization of
the standard ISO encoding
process.
• Custom Encoding or Raw Binary Encoding Mode – You can change the Magnetic Track options for
Tracks 1, 2 and 3 when using the Custom Encoding or Raw Binary Encoding Mode. These options are
not available for ISO or JIS II encoding.
Window TAB Procedure Procedure (continued)
Select 4 Bits to change the bits per
character to 4 BPC.
Note: This is the default for Track 3.
Select 5 Bits to change the bits per
character to 5 BPC.
Note: This is the default for Tracks 2
and 3.
Select 7 Bits to change the
bits per character to 7 BPC.
Note: This is the default for
Track 1.
Select 8 Bits to change the
bits per character to 8 BPC.
Select NULL to change the ASCII
Offset to NULL.
Select SPACE to change the ASCII
Offset to SPACE.
Note: This is the default for Track 1.
Select ZERO to change the
ASCII Offset to ZERO.
Note: This is the default for
Tracks 2 and 3.
Select 75 BPI to change the bits per
inch to 75 BPI.
Note: This is the default for Track 2.
Select 128 BPI to change the bits per
inch to 128 BPI.
Select 210 BPI to change the
bits per inch to 210 BPI.
Note: This is the default for
Tracks 1 and 3.
Select Custom BPI, which
enables the custom BPI text
box.
Note: The lower limit is 75 and
upper limit is 210.
Select No LRC to change the LRC
Generation to none.
Select Even Parity to change the LRC
Generation to Even Parity.
Note: This is the default for all tracks.
Select Odd Parity to
change the LRC
Generation to Odd Parity.
Select No Parity to change the
Character Parity to none.
Select Even Parity to change the
Character Parity to Even Parity.
Select Odd Parity to change
the Character Parity to Odd
Parity.
Note: This is the default for all
tracks.
To Next Page
Loading...
