© 2012 HID Global Corporation. All rights reserved.
186
HDP8500 Industrial Card Printer/Encoder User Guide L001617 rev 1.1
Reviewing the Alignment Self Test Card
Use this card to determine Image Placement and confirm that the Printer is
working properly. (Note: The image consists of sixteen (16) gray scale
boxes and alignment arrows. The gray boxes are composed from a
composite of YMC color panels.)
Adjust the TOF and EOF settings to change image placement.
Reviewing the Magnetic Self Test
This option only applies if a Magnetic Encoding Module is installed in the
Printer. (Note: The Printer will feed, encode and eject a card. Be sure to
have high coercivity cards installed when running this test.)
To Next Page
Loading...
