© 2012 HID Global Corporation. All rights reserved.
49
HDP8500 Industrial Card Printer/Encoder User Guide L001617 rev 1.1
Loading the Overlaminate
(Note: This procedure only applies to the HDP8500-LC.)
The loading process for both the Thermal Transfer Overlaminate and the PolyGuard™
Overlaminate material is the same. Refer to the following steps to load either type of
overlaminate into the Printer.
Unlock and open the Printer cover .
Remove the HDP Lamination Cartridge from the Printer.
Load the HDP Lamination into the Cartridge and click into place.
Tighten the HDP Laminate.
To Next Page
Loading...
