© 2012 HID Global Corporation. All rights reserved.
96
HDP8500 Industrial Card Printer/Encoder User Guide L001617 rev 1.1
Selecting the Coercivity/Magnetic Track
Use the ISO option for encoding capability for either high- or low-coercivity cards on tracks 1, 2
and 3 and is the industry's standard mode of magnetic encoding.
Select the Coercivity option (Oersted) to use the Magnetic Stripe type that
matches the card type.
Super High Coercivity =4000 Oerstad
High Coercivity = 2750Oersted
(Fargo‟s High Coercivity UltraCard IIIs are 2750 Oe)
Medium Coercivity = 600 Oersted
Low Coercivity = 300 Oersted
Select the Magnetic Track Selection option to specify which track is to be
configured through the Magnetic Track Options (if the application being used
requires customization of the standard ISO encoding process).
To Next Page
Loading...
