© 2012 HID Global Corporation. All rights reserved.
122
HDP8500 Industrial Card Printer/Encoder User Guide L001617 rev 1.1
Selecting the Calibrate Film tab
Calibrate button: Sends calibrate film command to Printer. Follow the instruction on the
page for setting up the Printer.
Select the Calibrate Film tab.
a. Leave the Film Cartridge installed.
b. Close the Printer Cover.
c. Click on the Calibrate button.
f. Click on the OK button to close the screen.
d. If successful the printer‟s LCD will reset to ready.
NOTE: Calibration of the Ribbon, Film, and Lamination may also be
performed from the DISPLAY ICON.
a. Leave the Film Cartridge installed
b. Close the Printer‟s Cover.
c. Select Film Calibrate option from the Display.
d. If successful the printer‟s LCD will reset to ready.
To Next Page
Loading...
