HID Fargo HDP8500 - Selecting the Calibrate Ribbon tab

© 2012 HID Global Corporation. All rights reserved.
123
HDP8500 Industrial Card Printer/Encoder User Guide L001617 rev 1.1
Selecting the Calibrate Ribbon tab
Calibrate button: Sends the Calibrate Ribbon Command to Printer. Follow the instructions
below to set up the Printer.
Step
Procedure
Option
1
Select the Calibrate Ribbon tab.
e. Leave the Ribbon Cartridge installed
a. Close the Printer Cover.
b. Click on the Calibrate button.
c. Click on the OK button to close the screen.
d. If successful the printer‟s LCD will reset to ready.
Option
2
NOTE: Calibration of the Ribbon, Film, and Lamination may also be
performed from the DISPLAY ICON.
f. Leave the Ribbon Cartridge installed
a. Close the Printer Cover.
b. Select Ribbon Calibrate option from the Display.
c. If successful the printer‟s LCD will reset to ready