© 2012 HID Global Corporation. All rights reserved.
134
HDP8500 Industrial Card Printer/Encoder User Guide L001617 rev 1.1
Using the Film Print Take-up Tension Option
IMPORTANT: The Film Drive sets the baseline for the Film Tension and should not be
adjusted by the reseller or the end User.
Adjustments moderately change the image length.)
Using the Resin Heat Adjust Option
Use this adjustment for Black resin text and barcodes appear faded or too light/dark.
Using the Sleep Time Option
This setting adjusts the time until printer stops energizing the transfer roller conserve energy. A
setting of “0” will disable. (Note: The counter for this setting starts after Standby Time has
elapsed.)
To Next Page
Loading...
