HID Fargo HDP8500 - Functional Specifications

© 2012 HID Global Corporation. All rights reserved.
19
HDP8500 Industrial Card Printer/Encoder User Guide L001617 rev 1.1
Functional Specifications
Component
Description
Card Cartridge
Load blank cards into this Cartridge.
Card Output
Hopper
Stores 200 cards.
Card
Lamination
Module
Works in conjunction with the Printer to apply a variety of different
overlaminates to printed cards, providing increased card durability
and security.
Will laminate in either the single or dual side (simultaneous) process
(Note: When printing a batch of cards, the Printer can be encoding
and printing one card while the Lamination Module laminates another
card.)
Display
3.2” AVGA TFT LCD w/ Resistive Touch Overlay
Printhead
The component of the Printer that actually does the printing.
USB Interface
Connect to the Windows PC USB port
Hardware
Accessories &
Connectivity
Each model has multiple cords and connectors.
US power cord
EU power cord
USB cable (2.0)
Ethernet
Print Modes
There are two print modes (Performance and Normal )
Normal print mode (default)
Performance print mode is faster with lower image quality and is
most suitable for minimal color with mostly resin text.
Resin Scramble
(OPTIONAL)
The system can hide any information printed with the resin panel.
Edge-to-Edge
Printing
Prints over the edge on CR-80 cards.
Color Profile
System Color Management & None