HID Fargo HDP8500 - Page 89

© 2012 HID Global Corporation. All rights reserved.
89
HDP8500 Industrial Card Printer/Encoder User Guide L001617 rev 1.1
The display (below) represents how the printed image will move in relation to the fixed card
position as positive and negative image placement values are entered.
Step
Procedure
2
Follow these instructions:
Use the Vertical adjustment to move the image toward the front of the
Printer if a positive number is entered and toward the rear of the Printer
if a negative number is entered.
OR
Use the Horizontal adjustment to move the image toward the card
output side of the Printer if a positive number is entered and toward the
card input side of the Printer if a negative number is entered.
(Note: The maximum value for the Vertical and Horizontal adjustments is
±100 Pixels (10 Pixels = 0.03 (.8mm).)