Thermal Image Scope User Manual
8
2.5.2 Quick Menu
In the live view mode, press to show the quick menu. You can set parameters such as
Brightness and Contrast in the quick menu.
Note
This function varies according to different camera models.
2.6 Client Software Connection
Connect the device to the HIKMICRO Sight app via hotspot, then you can capture picture, record
video, or configure parameters on your phone.
Steps
1. Search the HIKMICRO Sight app on App Store (iOS System) or Google Play™ (Android System) to
download it, or scan the QR code to download and install the app.
2. Hold to show the menu of device.
3. Press or to select , and press to enable hotspot.
4. Turn on the WLAN of your phone and connect to the hotspot.
● Hotspot Name: HIKMICRO_Serial No.
● Hotspot Password: Serial No. (The last 9 numbers of serial No.)
5. Open the app and connect your phone with the device. You can view the interface of device on
your phone.
Note
● The device cannot connect to the app if entering wrong password several times. Refer to
Restore Device
to reset the device, and connect the app again.
● The device should be activated for the first use. The default password must be changed after
the activation.
To Next Page
Loading...
Need help?
General
