Hikmicro THUNDER 2.0 Series User Manual

Thermal Image Scope User Manual
28
Chapter 7 System Settings
7.1 Adjust Date
Steps
1. Hold to show the main menu.
2. Go to General Settings, and select .
3. Press to enter the configuration interface.
4. Press to select the year, month, or day to be synchronized, and press or to
change the number, then press again to finish the setting.
5. Hold to save settings and exit.
7.2 Adjust Time
Steps
1. Hold to show the main menu.
2. Go to General Settings, and select .
3. Press to enter the configuration interface.
4. Press to select the hour, minute, second to be synchronized, and press or to
change the number, then press again to finish the setting.
5. Hold to save settings and exit.
7.3 Set Language
You can select the device language in this function.
Steps
1. Hold to show the main menu.
2. Go to General Settings, and select .
3. Press to enter the language configuration interface.
4. Press or to select the language as required, and press to confirm.
5. Hold to save settings and exit.
7.4 Set Unit
You can switch the unit for distance measurement.

Hikmicro THUNDER 2.0 Series Specifications

General

Brand	Hikmicro
Model	THUNDER 2.0 Series
Category	Thermal cameras
Language	English