Hikmicro THUNDER 2.0 Series - View Device Information; Restore Device

Thermal Image Scope User Manual
29
Steps
1. Hold to show the main menu.
2. Go to General Settings, and select .
3. Press or to select the unit. Yard and m (meter) are selectable.
4. Hold to save settings and exit.
7.5 View Device Information
Steps
1. Hold to show the main menu.
2. Go to General Settings, and select .
3. Press or to select , and press . You can view the device information such as
version, and serial No.
7.6 Restore Device
Steps
1. Hold to show the main menu.
2. Go to General Settings, and select .
3. Press to restore the device to defaults according to the prompt.