Hikmicro THUNDER 2.0 Series User Manual

Thermal Image Scope User Manual
22
Chapter 6 General Settings
You can manually record video or capture picture when displaying live view.
6.1 Set OSD
You can choose whether to display the OSD information on the live view interface.
Steps
1. Hold to show the main menu.
2. Go to Function Settings, and select .
3. Press to enable OSD first. You can press and to select and press to display
or hide the necessary OSD information.
– Date: Display or hide date information.
– Time: Display or hide time information.
4. Hold to save and exit.
6.2 Set Brand Logo
You can add brand logo on the live view interface.
Steps
1. Hold to show the main menu.
2. Go to Function Settings, and select .
3. Press to enable or disable Brand Logo.
4. Hold to save the settings and exit.
Result
The brand logo is displayed at the bottom left of the image.

Hikmicro THUNDER 2.0 Series Specifications

General

Pixel Pitch	12 μm
Frame Rate	50 Hz
Video Recording	Yes
Photo Capture	Yes
Wi-Fi	Yes
Resolution	384x288 / 640x512
Objective Lens	19mm / 25mm / 35mm / 50mm
Battery Type	Rechargeable Li-ion
Digital Zoom	1x
Spectral Range	8 μm to 14 μm