Hikmicro THUNDER 2.0 Series User Manual

Thermal Image Scope User Manual
24
6.5.2 Set Audio
If you enable the audio function, the sound will be recorded with the video. When there is too
loud noise in the video, you can disable this function.
Steps
1. Hold to show the main menu.
2. Press or to select , and press to enable or disable this function.
3. Hold to save and exit.
6.5.3 Record Video
Steps
1. In the live view mode, hold and start recording.
The left top of image displays the information of recording time.
Figure 6-2 Record Video
2. Hold again to stop recording.
What to do next
For exporting recording files, refer to Export Files
.
6.5.4 Prerecord Video
After enabling this function, the device can automatically record the 7 seconds before and after
the recoil-activation.
Steps
1. Hold to show the main menu.
2. Press or to select .
3. Press to switch on/off this function.
4. Hold to save and exit.

Hikmicro THUNDER 2.0 Series Specifications

General

Brand	Hikmicro
Model	THUNDER 2.0 Series
Category	Thermal cameras
Language	English