Hikmicro THUNDER 2.0 Series User Manual

Thermal Image Scope User Manual
i
Safety Instruction
These instructions are intended to ensure that user can use the product correctly to avoid danger
or property loss.
Laws and Regulations
● Use of the product must be in strict compliance with the local electrical safety regulations.
Symbol Conventions
The symbols that may be found in this document are defined as follows.
Symbol
Description
Danger
Indicates a hazardous situation which, if not avoided, will or
could result in death or serious injury.
Caution
Indicates a potentially hazardous situation which, if not avoided,
could result in equipment damage, data loss, performance
degradation, or unexpected results.
Note
Provides additional information to emphasize or supplement
important points of the main text.
Transportation
● Keep the device in original or similar packaging while transporting it.
● Keep all wrappers after unpacking them for future use. In case of any failure occurred, you need
to return the device to the factory with the original wrapper. Transportation without the
original wrapper may result in damage on the device and the company shall not take any
responsibilities.
● DO NOT drop the product or subject it to physical shock. Keep the device away from magnetic
interference.
Power Supply
● The input voltage for the device should meet the Limited Power Source (5 VDC, 2 A) according
to the IEC61010-1 or IEC62368 standard. Please refer to actual products and technical
specifications for detailed information.
● Use the power adapter provided by qualified manufacturer. Refer to the product specification
for detailed power requirements.
● Make sure the plug is properly connected to the power socket.
● DO NOT connect multiple devices to one power adapter, to avoid over-heating or fire hazards
caused by overload.
Battery
● Improper use or replacement of the battery may result in explosion hazard. Replace with the
same or equivalent type only.
● Use the battery provided by qualified manufacturer. Refer to the product specification for
detailed battery requirements.
● The device supports removable li-ion battery. The charging limited voltage of the battery is 4.2

Hikmicro THUNDER 2.0 Series Specifications

General

Brand	Hikmicro
Model	THUNDER 2.0 Series
Category	Thermal cameras
Language	English