HikRobot X86 - 1.2 Interface Description; 1.3 Power and I;O Interface Details

X86 Open Platform·User Manual
2
The lens mount of the device is C-mount.
1.2 Interface
The device has a RJ45 gigabit Ethernet interface with aviation connector, a 12-pin power and I/O
interface, a 17-pin expansion interface. All interfaces are designed with screw threads to tighten
connection between the device and cables, and thus avoid influence caused by vibration.
1
2
3
Figure 1-3 Interface
Table 1-1 Interface Description
No.
Description
1
Power and I/O Interface
2
Expansion interface
3
RJ45 gigabit Ethernet interface
1.3 Power and I/O Interface
The device has a 12-pin power and I/O interface as shown in Figure 1-4, and the respective
pin definitions are shown in Table 1-2.