HikRobot X86 - 3.4 Connecting Device to MVS

X86 Open Platform·User Manual
15
 You can modify the IP address of the device if its status is free.
 When switching between static IP and DHCP, you need to restart the device manually.
 Change the IP address if the modified IP address conflicts with another device's IP address in
the same local subnet.
 The parameters in the figure are only for reference. Please enter the parameters according to
the actual situation.
3.4 Connect Device to MVS
Steps:
1. Power on the device.
2. Double click the MVS client to open it.
3. Click to find the device in device list.
4. Double click the device or click to connect it to the client.
Figure 3-5 Connect Device