HikRobot X86 - Page 56

X86 Open Platform·User Manual
46
Figure 9-6 Set Indicator
For specific indicator functions, please refer to following table for details.
Table 9-1 Indicator Function Description
No.
Name
Description
1
Off
It refers to disable this function.
2
Who Am I
When selected, click Execute, and indicator flashes
once. You can see which device you are operating.
3
System Running
When the device is running properly, the indicator
keeps flashing.
4
Be Triggered
When trigger signal inputs, indicator flashes once.
5
Line0 Out
When Line0 Out outputs signal, indicator flashes once.
6
Line1 Out
When Line1 Out outputs signal, indicator flashes once.
7
Line2 Out
When Line2 Out outputs signal, indicator flashes once.
8
Line3 Out(Build-in Light)
When Light port outputs and connects to a light source
device, indicator flashes once.
It is not recommended to change the default status of User2 LED indicator.