Steps
1. Click User Management → User to enter the User Management page.
2. To compliant the EN requirement, slide the block to enable the installer and manufacturer .
Note
• The default password of the installer is installer12345, and the default password of the
manufacturer is hik12345. These codes will have to be changed when
rst connected.
• The Italian user name of admin is admin.
Table 5-5 User Name of Installer
Language User Name Language User Name
English installer Russian монтажник
Italian installatore French installateur
Polish instalator Spanish instalador
German errichter Portuguese instalador
Turkish kurulumcu Czech technik
3. Click Add.
4. Set the new user's informaon in the pop-up window, including the user type, the user name,
and the password.
Figure 5-10 Add User Page
5. Set the keypad password (numeric, 8~16 characters).
AX Security Control Panel
91
To Next Page
Loading...
