HIKVISION AX DS-PWA32-HSR

4.4.10 Bypass Zone
When the paron is armed, you can bypass a parcular zone as you desired.
Before You Start
Link a detector to the zone.
Steps
1. On the device list page, tap the security control panel and then log in to the device (if required)
to enter the
Paron page.
2. Select a zone in the Zone tab to enter the sengs page.
3. Select a zone and enter the
Sengs page.
Figure 4-42 Zone Sengs Page
4. Enable Zone Bypass and the zone will be in the bypass status.
The detector in the zone does not detect anything and you will not receive any alarm from the
zone.
AX Security Control Panel
70