HIKVISION AX DS-PWA32-HSR

Cellular Data Network
The system will select cellular data network only.
8. Click Save.
NAT
Universal Plug and Play (UPnP™) is a networking architecture that provides compability among
networking equipment, soware and other hardware devices. The UPnP protocol allows devices to
connect seamlessly and to simplify the
implementaon of networks in the home and corporate
environments.
Enable the UPnP funcon, and you don’t need to congure the port mapping for each port, and
the device is connected to the Wide Area Network via the router.
Steps
1. Click
Communicaon Parameters → NAT to enter the page.
Figure 4-11 NAT Sengs
2. Drag the slider to enable UPnP.
3. Oponal: Select the mapping type as Manual
4. Set the HTTP port and the service port.
5. Click Save to complete the
sengs
4.3.2 Device Management
Zone
You can set the zone parameters on the zone page.
AX Security Control Panel
30