HIKVISION AX DS-PWA32-HSR

EN Mode
the Paron page, tap to enter the page. Slide to enable EN Mode.
Note
The device will be auto rebooted when you turn on or turn o EN Mode.
4.4.14 Check Alarm Nocaon
When an alarm is triggered, and you will receive an alarm nocaon. You can check the alarm
informaon from the mobile client.
Before You Start
• Make sure you have linked a zone with a detector.
• Make sure the zone is not bypassed.
• Make sure you have not enabled the silent zone
funcon.
Steps
1. Tap Nocaon in the mobile client to enter the page.
Figure 4-45 Nocaon Page
All alarm nocaons are listed in Nocaon page.
2. Select an alarm and you can view the alarm details.
AX Security Control Panel
75