HIKVISION AX DS-PWA32-HSR

4. Enter IP Address, Port, User Name and Password.
5. Tap
to add channel.
6.
Oponal: Edit a channel.
1) Select a channel in the list.
Figure 4-48 Network Camera Sengs
2) Tap to enetr the eding mode.
3) Edit parameters.
4) Tap to save.
7.
Oponal: Select a channel and tap Delete to delete it.
4.4.16 Set Event Video
Sengs
On the device list page, tap the security control panel and then log in to the device (if required) to
enter the control panel page.
Tap → Event Video Sengs to enter the page.
You need to select the video channel and set parameters.
AX Security Control Panel
77