HIKVISION AX DS-PWA32-HSR - Arming and Disarming Zones; Partition Operations (Single and All)

Figure 4-41 Paron Page
Operaons for a Single Paron
• Away: When all the people in the detecon area leave, turn on the Away mode to arm all zones
in the
paron aer the dened dwell me.
• Stay: When the people stays inside the detecon area, turn on the Stay mode to arm all the
perimeter burglary
detecon (such as perimeter detector, magnec contacts, curtain detector in
the balcony). At the meanme, the detectors inside the detecon area are bypassed (such as PIR
detectors). People can move inside the area and alarm will not be triggered.
• Disarm: In Disarm mode, all the zones in the
paron will not trigger alarm, no maer alarm
events happen or not.
• Clear Alarm: Clear all the alarms triggered by the zones of the
paron.
Operaons for All Parons
• Away: When all the people in the detecon area leave, turn on the Away mode to arm all zones
in all parons aer the dened dwell me.
• Stay: When the people stays inside the detecon area, turn on the Stay mode to arm all the
perimeter burglary detecon (such as perimeter detector, magnec contacts, curtain detector in
the balcony) set in all the zones of all parons. At the meanme, the detectors inside the
detecon area are bypassed (such as PIR detectors). People can move inside the area and alarm
will not be triggered.
• Disarm: In Disarm mode, all the zones of all
parons will not trigger alarm, no maer alarm
events happen or not.
• Clear Alarm: Clear all the alarms triggered by the all the zones of all the
parons.
AX Security Control Panel
69