HIKVISION DS-1100KI(B) - Chapter 2 Activation; Local Menu Activation

Chapter 2 Acvaon
You can acvate network keyboard via local menu, SADP client or Web interface.
2.1 Local Menu Acvaon
For the rst-me access, you need to acvate the network keyboard by seng an admin password.
Steps
1. Connect your network keyboard power supply to an electrical outlet, and turn on the network
keyboard.
The
acvaon interface will be popped up automacally.
2. Set password and conrm it.
Warning
We highly recommend you create a strong password of your own choosing (Using a minimum of
8 characters, including at least three of the following categories: upper case leers, lower case
leers, numbers, and special characters.) in order to increase the security of your product. And
we recommend you reset your password regularly, especially in the high security system,
reseng the password monthly or weekly can beer protect your product.
Figure 2-1 Acvaon
3. Tap Acvate.
DS-1100KI(B) Network Keyboard User Manual
2