HIKVISION DS-1100KI(B) - Connect the Device through Serial Ports; Connect Video Recorders

4.9 Connect the Device Through Serial Ports
The network keyboard can be connected to the device through RS-232 and RS-485 serial port. Aer
the connecon, the keyboard can be used to control the video recorder, analog dome and analog
matrix.
4.9.1 Connect Video Recorders
The keyboard can be connected to the video recorder through RS-485 serial port to realize preview,
playback, PTZ control and other
funcons.
Steps
1. Connect the KB port of the video recorder with the RS-485 interface of the keyboard.
Note
T+ and T- of RS-485 interface correspond to D+ and D- of KB port respecvely.
2. Enter Serial Port Control, and select DVR/NVR.
3. Select Device Address.
4. Select Device Version.
Note
• The device version is the
rmware version of the corresponding device.
• Please select according to the actual device version. Wrong version selecon will cause some
funcon excepons.
5. Control video recorder through remote panel of video recorder. For details, see Remote Panel .
Note
You can only control the video recorder through the joysck and touchscreen, and the shortcut
of network keyboard cannot be used to control the video recorder.
DS-1100KI(B) Network Keyboard User Manual
30