HIKVISION DS-1100KI(B) - Chapter 5 Isecure Mode; Login

Chapter 5 iSecure Mode
5.1 Login
Steps
1. Tap iSecure at home page.
Figure 5-1 Log in to iSecure
2. Tap Server IP on the upper right corner.
Figure 5-2 Server IP Conguraon
3. Select Hp or Hps as the login mode.
4. Enter the IP address and port No. of the server, and tap OK.
5. Enter the user name and password of the server.
6.
Oponal: Check Remember.
7. Tap Login.
Note
•
Aer several failed login aempts, you need to enter vericaon code. The details are subject
to the actual interface.
• When you aempt to log into the plaorm for the rst me, you will be prompted to log into
the client rst.
DS-1100KI(B) Network Keyboard User Manual
34